PPoossttffiixx NNoonn--BBeerrkkeelleeyy--DDBB mmiiggrraattiioonn

-------------------------------------------------------------------------------

TTaabbllee ooff ccoonntteennttss

Note: be sure to visit the on-line version of this text at https://
www.postfix.org/NON_BERKELEYDB_README.html, as support for different Postfix
versions may be added over time.

  * Introduction
  * Background
  * Skip this if not building Postfix from source, or if your system still
    supports Berkeley DB
  * Migration support level overview
  * Level 'disable': manual migration
  * Level 'enable-redirect': database aliasing
  * Level 'enable-reindex': redirect and automatically generate non-Berkeley-DB
    indexed files
  * Addressing errors with automatic indexed file generation
  * Appendix: Mailman integration

IInnttrroodduuccttiioonn

(With Postfix 3.10 and earlier, please skip to the "Manual Migration Process".)

(Please see the Appendix for Mailman integration tips.)

After running the same Postfix configuration for a decade or more, there is a
rude awakening when you update the OS to a newer version that has deleted its
support for Berkeley DB. Postfix programs fail to open all hash: and btree:
tables with messages like this:

    Berkeley DB support for 'hash:/etc/postfix/virtual' is not available
    for this build; see https://www.postfix.org/NON_BERKELEYDB_README.html
    for alternatives

This document comes to the rescue, with strategies to migrate an existing
Postfix configuration that uses Berkeley DB hash: and btree: database files, to
an OS distribution that has removed Berkeley DB support, with a Postfix
configuration that uses lmdb: (or a combination of cdb: and lmdb:).

By the way, you don't have to wait until Berkeley DB support is removed; your
can proactively use the steps described here on a system that still has
Berkeley DB, to migrate a Postfix configuration from Berkeley DB to lmdb: (or a
combination of cdb: and lmdb:).

BBaacckkggrroouunndd

Historically, Postfix has used Berkeley DB hash: and btree: for key-value
stores, as indicated in the "With Berkeley DB" table column below. In a world
without Berkeley DB, good replacements are cdb: and lmdb: as indicated in the
"No Berkeley DB" column.

     _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
    |PPuurrppoossee           |WWiitthh BBeerrkkeelleeyy DDBB           |NNoo BBeerrkkeelleeyy DDBB            |
    |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
    |Mostly-static data|                           |default_database_type=lmdb|
    |such as aliases,  |default_database_type=hash |or                        |
    |transport_maps,   |                           |default_database_type=cdb |
    |access tables     |                           |                          |
    |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
    |Dynamic caches    |                           |                          |
    |maintained by     |                           |                          |
    |postscreen(8),    |default_cache_db_type=btree|default_cache_db_type=lmdb|
    |verify(8), tlsmgr |                           |                          |
    |(8)               |                           |                          |
    |_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |

The default values for default_database_type and default_cache_db_type may be
specified at build time (see the section below, and they may be changed later
by editing main.cf, for example with the postconf(1) command.)

The sections that follow present three migration strategies with different
levels of assistance by tooling that was developed for Postfix 3.11 and later.

SSkkiipp tthhiiss iiff nnoott bbuuiillddiinngg PPoossttffiixx ffrroomm ssoouurrccee,, oorr iiff yyoouurr ssyysstteemm ssttiillll ssuuppppoorrttss
BBeerrkkeelleeyy DDBB..

Click here to skip to the next section.

On systems that have removed Berkeley DB support, run "make makefiles" with a
CCARGS value that (also) contains "-DNO_DB", and specify appropriate values for
default_database_type (lmdb or cdb) and default_cache_db_type (lmdb).

In the examples below, the "..." are place holders any dependencies that you
build Postfix with, such as CDB, LDAP, LMDB, MySQL/MariaDB, OpenSSL, SASL, and
so on.

  * Example 1: use lmdb: for both default_database_type (read-mostly lookup
    tables) and default_cache_db_type (read-write caches). Terminal input is
    bboolldd, output is normal font.

        $ mmaakkee mmaakkeeffiilleess CCCCAARRGGSS==""--DDNNOO__DDBB ......"" \\
            ddeeffaauulltt__ddaattaabbaassee__ttyyppee==llmmddbb \\
            ddeeffaauulltt__ccaacchhee__ddbb__ttyyppee==llmmddbb ...... \\
            AAUUXXLLIIBBSS......

    See LMDB_README for LMDB-specific instructions.

  * Example 2: alternative form that produces the same result.

        $ eexxppoorrtt CCCCAARRGGSS==""--DDNNOO__DDBB ......""
        $ eexxppoorrtt ddeeffaauulltt__ddaattaabbaassee__ttyyppee==llmmddbb
        $ eexxppoorrtt ddeeffaauulltt__ccaacchhee__ddbb__ttyyppee==llmmddbb
        $ eexxppoorrtt AAUUXXLLIIBBSS......
        ...
        $ mmaakkee mmaakkeeffiilleess

    See LMDB_README for LMDB-specific instructions.

  * Another alternative is to use cdb for default_database_type (read-mostly
    lookup tables) and lmdb for default_cache_db_type (read-write caches). See
    CDB_README for CDB-specific instructions.

MMiiggrraattiioonn ssuuppppoorrtt lleevveell oovveerrvviieeww

The goal of the migration is clear: stop using hash: and btree:, and use lmdb:
or cdb: instead. If your configuration is simple or if you are familiar with
Postfix configuration, a few "grep" commands will find all the problems, and a
few edits will be easy to make.

If, on the other hand, you are not familiar with the details of your Postfix
configuration, then this document provides options where Postfix can help.

Postfix 3.11 introduces multiple levels of migration support. You can use the
command "postfix non-bdb status" to view the migration support level. This is
what the default should look like (terminal input is bboolldd, output is normal
font):

    # ppoossttffiixx nnoonn--bbddbb ssttaattuuss
    disable

In increasing order, the support levels are:

disable (manual migration)
    You start up Postfix, watch the logging when Postfix programs fail to open
    a hash: or btree: table, edit Postfix configuration files to use lmdb: or
    cdb:, then run postmap(1) or postalias(1) commands to create lmdb: or cdb:
    indexed database files. Use this option if you are familiar with Postfix
    configuration.

    This will not fix the integration with Mailman versions from before gitlab
    commit 8fa56b72 (May 2025) and other software that are broken when they
    want to use "postmap hash:/path/to/file". Mailman uses this to maintain a
    table with mailing list contact addresses. For that, you need to use the
    next-up level.

enable-redirect (database aliasing)
    This level implicitly redirects a request to access hash:/path/to/file to
    $default_database_type:/path/to/file, and redirects a request to access a
    btree:/path/to/file to $default_cache_db_type:/path/to/file.

    This still requires manually running postmap(1) or postalias(1) commands,
    but "fixes" the integration with Mailman versions from before gitlab commit
    8fa56b72 (May 2025) and other software when they want to use "postmap hash:
    /path/to/file", and Berkeley DB support is not available. Such commands
    will implicitly create a new lmdb: or cdb: indexed database file, depending
    on the default_database_type value.

enable-reindex (aliasing, plus running postmap(1) or postalias(1))
    This level implements "enable-redirect (database aliasing)", and also runs
    the postmap(1) or postalias(1) command to create a new lmdb or cdb indexed
    database file. This uses the nbdb_reindexd(8) daemon.

The levels enable-redirect and enable-reindex leave some technical debt:
configurations that still say hash: or btree: (even if they use lmdb: or cdb:
behind the scene).

  * Using these levels gives you extra time to prepare for a long-term
    configuration change that replaces hard-coded instances of hash: with the
    value of default_database_type, and that replaces btree: with the value of
    default_cache_db_type.

  * Depending on your use of other software that wants to use postmap(1) or
    postalias(1) commands, you may have to permanently the leave the enable-
    redirect level active.

After this overview, the sections that follow will go into more detail.

LLeevveell ''ddiissaabbllee'':: mmaannuuaall mmiiggrraattiioonn

(With Postfix 3.10 and earlier please skip to "Manual Migration Process"
below.)

On Postfix 3.11 and later, to disable all non-Berkeley-DB migration features
use the "postfix non-bdb" command:

    # ppoossttffiixx nnoonn--bbddbb ddiissaabbllee
    # ppoossttffiixx rreellooaadd

This will edit main.cf to remove a non_bdb_migration_level setting and the
level revert to its implicit default (disable), and will edit master.cf to
remove an entry for the reindex service.

This setting will cause problems with Mailman versions from before gitlab
commit 8fa56b72 (May 2025) and other software that wants to use "postmap hash:/
path/to/file" (or similar postalias commands), and Berkeley DB support is no
longer available. In that case, you will need the "enable-redirect" migration
support level.

The manual migration process goes like this:

 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
|MMaannuuaall MMiiggrraattiioonn PPrroocceessss ((aallll PPoossttffiixx vveerrssiioonnss))                              |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
|                                                                             |
|  * Stop Postfix.                                                            |
|                                                                             |
|  * Make lmdb the default for both default_database_type (read-mostly lookup |
|    tables) and default_cache_db_type (read-write caches):                   |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff ddeeffaauulltt__ddaattaabbaassee__ttyyppee==llmmddbb ddeeffaauulltt__ccaacchhee__ddbb__ttyyppee==llmmddbb         |
|                                                                             |
|  * Alternatively, make cdb the default for default_database_type (read-     |
|    mostly lookup tables).                                                   |
|                                                                             |
|  * Look for hash: and btree: references in Postfix configuration files.     |
|    Instead of /etc/postfix use the pathname in the output from "postconf -  |
|    x config_directory".                                                     |
|                                                                             |
|                                                                             |
|    # ggrreepp --EE --rr ''((hhaasshh||bbttrreeee)):://'' //eettcc//ppoossttffiixx                               |
|                                                                             |
|    (Use "egrep" on systems that do not support "grep -E".)                  |
|                                                                             |
|  * For each instance in the "grep" output :                                 |
|                                                                             |
|                                                                             |
|     1. Edit the configuration file and replace "hash" with "lmdb" or "cdb"  |
|        (use the same value as the output from "ppoossttccoonnff --hhxx                 |
|        ddeeffaauulltt__ddaattaabbaassee__ttyyppee") and replace "btree" with "lmdb".             |
|                                                                             |
|     2. If this instance has no source file (only the ".db" file exists),    |
|        proceed with the next instance of "grep" output.                     |
|                                                                             |
|     3. Postfix 3.11 and later: if this instance appears in the output from  |
|        "ppoossttccoonnff --hhPPPPxx ''**//**//aalliiaass__mmaappss'' || ssoorrtt --uu", run the postalias(1)    |
|        command. If this instance is like "lmdb:/path/to/source":            |
|                                                                             |
|                                                                             |
|        # ppoossttaalliiaass llmmddbb:://ppaatthh//ttoo//ssoouurrccee                                     |
|                                                                             |
|        Instead of "lmdb:" use "cdb:" if the instance is like "cdb:/path/to/ |
|        source".                                                             |
|                                                                             |
|     4. Postfix 3.10 and earlier: if this instance appears in the output from|
|        "ppoossttccoonnff --hhxx aalliiaass__mmaappss", run the postalias(1) command. If this     |
|        instance is like "lmdb:/path/to/source":                             |
|                                                                             |
|                                                                             |
|        # ppoossttaalliiaass llmmddbb:://ppaatthh//ttoo//ssoouurrccee                                     |
|                                                                             |
|        Instead of "lmdb:" use "cdb:" if the instance is like "cdb:/path/to/ |
|        source".                                                             |
|                                                                             |
|     5. Otherwise, run the postmap(1) command. If this instance is like      |
|        "lmdb:/path/to/source":                                              |
|                                                                             |
|                                                                             |
|        # ppoossttmmaapp llmmddbb:://ppaatthh//ttoo//ssoouurrccee                                       |
|                                                                             |
|        Instead of "lmdb:" use "cdb:" if this instance is like "cdb:/path/to/|
|        source".                                                             |
|                                                                             |
|                                                                             |
|  * Disable inbound network mail, start Postfix, and send a test message     |
|    using the Postfix sendmail(1) command.                                   |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff mmaasstteerr__sseerrvviiccee__ddiissaabbllee == iinneett                                 |
|    # ppoossttffiixx ssttaarrtt                                                          |
|    # sseennddmmaaiill --bbvv ppoossttmmaasstteerr                                                |
|                                                                             |
|  * Watch the log for warnings about files that cannot be opened, find the   |
|    configuration file that still uses "hash" or "btree", and repeat steps 1-|
|    5 above.                                                                 |
|                                                                             |
|  * Enable inbound network mail, reload Postfix, and connect to the Postfix  |
|    SMTP network port.                                                       |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff --XX mmaasstteerr__sseerrvviiccee__ddiissaabbllee                                     |
|    # ppoossttffiixx rreellooaadd                                                         |
|    # tteellnneett hhoossttnnaammee 2255                                                     |
|                                                                             |
|  * Watch the log for warnings about files that cannot be opened, find the   |
|    configuration file that still uses "hash" or "btree", and repeat steps 1-|
|    5 above.                                                                 |
|                                                                             |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |

LLeevveell ''eennaabbllee--rreeddiirreecctt'':: ddaattaabbaassee aalliiaassiinngg ((PPoossttffiixx 33..1111 aanndd llaatteerr))

This level is enabled with:

    # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeddiirreecctt
    # ppoossttffiixx rreellooaadd

But you should probably wait and review the "Migration Process" below first.

This postfix non-bdb" command edits main.cf to enable redirection (aliasing)
from Berkeley DB types "hash" and "btree" to the non-Berkeley-DB types
specified with $default_database_type and $default_cache_db_type. Custom
redirection may be configured with non_bdb_custom_mapping. This command also
edits master.cf to remove an unused nbdb_reindex service entry.

The redirection activity is logged by default, to help discovering obsolete
configuration. Example:

    redirecting hash:/etc/postfix/transport to lmdb:/etc/postfix/transport

This logging may be disabled by setting "non_bdb_migration_log_redirect = no".

This migration support level will not automatically create non-Berkeley-DB
indexed database files; if you need that, see "enable-redirect below. Instead,
Postfix programs will log an error as they fail to open an indexed database
file, and will leave it to the system administrator to run postmap(1) or
postalias(1) to create that file.

 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
|MMiiggrraattiioonn PPrroocceessss wwiitthh ''eennaabbllee--rreeddiirreecctt'' ((PPoossttffiixx 33..1111 aanndd llaatteerr))            |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
|Suspend inbound mail with:                                                   |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff mmaasstteerr__sseerrvviiccee__ddiissaabbllee == iinneett                                 |
|                                                                             |
|                                                                             |
|Enable database redirection:                                                 |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeddiirreecctt                                        |
|                                                                             |
|                                                                             |
|Start (or reload) Postfix, and send a test message using the Postfix sendmail|
|(1) command.                                                                 |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttffiixx ssttaarrtt (or ppoossttffiixx rreellooaadd)                                      |
|    # sseennddmmaaiill --bbvv ppoossttmmaasstteerr                                                |
|                                                                             |
|                                                                             |
|Scan the logging for failure to open database files. For each instance of    |
|"hash:/path/to/source" or "btree:/path/to/source" that requires manually     |
|running postmap(1) or postalias(1):                                          |
|                                                                             |
|                                                                             |
|  * If this instance appears in the output from "ppoossttccoonnff --hhPPPPxx ''**//**//        |
|    aalliiaass__mmaappss'' || ssoorrtt --uu", run the postalias(1) command. If this instance is|
|    like "lmdb:/path/to/source":                                             |
|                                                                             |
|                                                                             |
|    # ppoossttaalliiaass llmmddbb:://ppaatthh//ttoo//ssoouurrccee                                         |
|                                                                             |
|    Instead of "lmdb:" use "cdb:" if the instance is like "cdb:/path/to/     |
|    source".                                                                 |
|                                                                             |
|  * Otherwise, run the postmap(1) command. If this instance is like "lmdb:/  |
|    path/to/source":                                                         |
|                                                                             |
|                                                                             |
|    # ppoossttmmaapp llmmddbb:://ppaatthh//ttoo//ssoouurrccee                                           |
|                                                                             |
|    Instead of "lmdb:" use "cdb:" if this instance is like "cdb:/path/to/    |
|    source".                                                                 |
|                                                                             |
|                                                                             |
|Resume inbound mail, reload Postfix, and connect to the Postfix SMTP network |
|port:                                                                        |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff --XX mmaasstteerr__sseerrvviiccee__ddiissaabbllee                                     |
|    # ppoossttffiixx rreellooaadd                                                         |
|    # tteellnneett hhoossttnnaammee 2255                                                     |
|                                                                             |
|                                                                             |
|This may reveal a few more problems. Once there are no more errors with      |
|opening database files for about 24 hours, scan the log for messages similar |
|to:                                                                          |
|                                                                             |
|                                                                             |
|                                                                             |
|    redirecting xxx:/path/to/file to yyy:/path/to/file                       |
|                                                                             |
|                                                                             |
|and update the obsolete Postfix configuration settings, replacing "xxx:/path/|
|to/file" with "yyy:/path/to/file.                                            |
|                                                                             |
|Once there is no more "redirect" logging, and there are no other programs    |
|(such as Mailman, see Appendix below) that want to use "postmap hash:/path/  |
|to/file", then you can turn off non-Berkeley-DB migration support (see       |
|"disable" above).                                                            |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |

This migration support level will fix problems with Mailman versions from
before May 2025 and other software that wants to use "postmap hash:/path/to/
file". With database redirection, such commands will implicitly create an
indexed file for $default_database_type:/path/to/file (similar aliasing happens
for postalias commands).

The command "postfix non-bdb enable-redirect" will refuse to make any changes
when default_database_type or default_cache_db_type specify a hash: or btree:
type.

LLeevveell ''eennaabbllee--rreeiinnddeexx'':: rreeddiirreecctt aanndd aauuttoommaattiiccaallllyy ggeenneerraattee nnoonn--BBeerrkkeelleeyy--DDBB
iinnddeexxeedd ffiilleess ((PPoossttffiixx 33..1111 aanndd llaatteerr))

NOTE: this level should be used only temporarily to generate most of the non-
Berkeley-DB indexed files that Postfix needs. Leaving this enabled may expose
the system to privilege-escalation attacks. There are no security concerns for
using enable-redirect.

This level is enabled with:

    # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeiinnddeexx

But you should probably wait and review the "Migration Process" below first.

This postfix non-bdb command edits main.cf to set the non-Berkeley-DB migration
support level, and master.cf to add or replace an nbdb-reindex service entry.

The resulting configuration implements not only the functionality of enable-
redirect, but also tries to automatically create a non-Berkeley-DB indexed
database file when a daemon program wants to access a file that does not exist.
This uses the nbdb_reindexd(8) daemon to run postmap(1) or postalias(1)
commands for databases that satisfy basic requirements to block privilege-
escalation attacks. The number of requirements is large, but mainly, database
files and their parent directory must not allow write access for group or other
users, and their pathnames must match a list of trusted directory prefixes. The
complete list of requirements is documented in nbdb_reindexd(8).

This command immediately generates non-Berkeley-DB indexed files for command-
line programs that lack privileges to send requests to the nbdb_reindexd(8)
indexing server. This applies to "hash:" and "btree:" tables that are used by
postqueue(1) and sendmail(1) as configured with authorized_flush_users and
authorized_mailq_users, and used by sendmail(1) and postdrop(1) as configured
with authorized_submit_users and local_login_sender_maps.

The command "postfix non-bdb enable-reindex" will refuse to make any changes
when default_database_type or default_cache_db_type specify a hash: or btree:
type.
 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
|MMiiggrraattiioonn PPrroocceessss wwiitthh ''eennaabbllee--rreeiinnddeexx'' ((PPoossttffiixx 33..1111 aanndd llaatteerr))             |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |
|Suspend inbound mail with:                                                   |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff mmaasstteerr__sseerrvviiccee__ddiissaabbllee == iinneett                                 |
|                                                                             |
|                                                                             |
|Enable automatic re-indexing:                                                |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeiinnddeexx                                         |
|                                                                             |
|                                                                             |
|Start (or reload) Postfix, and send a test message using the Postfix sendmail|
|(1) command.                                                                 |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttffiixx ssttaarrtt (or ppoossttffiixx rreellooaadd)                                      |
|    # sseennddmmaaiill --bbvv ppoossttmmaasstteerr                                                |
|                                                                             |
|                                                                             |
|The nbdb_reindexd(8) daemon will log when it successfully runs a postmap(1)  |
|or postalias(1) command. Examples, for a system with "default_database_type =|
|lmdb":                                                                       |
|                                                                             |
|                                                                             |
|                                                                             |
|    successfully executed 'postmap lmdb:/etc/postfix/transport' as uid 0     |
|    successfully executed 'postalias lmdb:/etc/aliases' as uid 0             |
|                                                                             |
|                                                                             |
|If Postfix programs logs error messages like:                                |
|                                                                             |
|                                                                             |
|                                                                             |
|    could not execute command xxx...                                         |
|                                                                             |
|                                                                             |
|see the section "Addressing errors with automatic indexed file generation"   |
|for the most likely errors that Postfix programs may log.                    |
|                                                                             |
|Once there are no more errors from Postfix programs, resume inbound mail,    |
|reload Postfix, and connect to the Postfix SMTP network port:                |
|                                                                             |
|                                                                             |
|                                                                             |
|    # ppoossttccoonnff --XX mmaasstteerr__sseerrvviiccee__ddiissaabbllee                                     |
|    # ppoossttffiixx rreellooaadd                                                         |
|    # tteellnneett hhoossttnnaammee 2255                                                     |
|                                                                             |
|                                                                             |
|This may reveal a few more problems. Once there are no more errors from      |
|Postfix programs for about 24 hours, turn off automatic index generation by  |
|reducing the support level to enable-redirect with:                          |
|                                                                             |
|                                                                             |
|                                                                             |
|    # postfix non-bdb enable-redirect                                        |
|    # postfix reload                                                         |
|                                                                             |
|                                                                             |
|Then, scan the log for instances similar to:                                 |
|                                                                             |
|                                                                             |
|                                                                             |
|    redirecting xxx:/path/to/file to yyy:/path/to/file                       |
|                                                                             |
|                                                                             |
|and update the obsolete Postfix configuration settings, replacing "xxx:/path/|
|to/file" with "yyy:/path/to/file.                                            |
|                                                                             |
|Once there is no more "redirect" logging, and there are no other programs    |
|(such as Mailman, see Appendix below) that want to use "postmap hash:/path/  |
|to/file", then you can turn off non-Berkeley-DB migration support (see       |
|"disable" above). You will have keep Postfix configured with "enable-        |
|redirect" until Mailman can be updated to a version that supports other      |
|Postfix database types.                                                      |
|_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ |

AAddddrreessssiinngg eerrrroorrss wwiitthh aauuttoommaattiicc iinnddeexxeedd ffiillee ggeenneerraattiioonn

UUnneexxppeecctteedd ppaatthhnnaammee eerrrroorrss

Depending on the location of your Postfix lookup tables, Postfix programs may
log a request to add a trusted directory to the directories listed with
non_bdb_migration_allow_root_prefixes or non_bdb_migration_allow_user_prefixes.

Example, with line breaks added for readability:

    could not execute command 'postmap lmdb:/path/to/file': table
    /path/to/file has an unexpected pathname;

    to allow automatic indexing as root, append its parent directory
    to the non_bdb_migration_allow_root_prefixes setting (current setting
    is: "/etc /usr/local/etc");

    alternatively, execute the failed command by hand

You have two options:

 1. If you think that the suggested change is safe, update the setting as
    proposed and execute "postfix reload".

 2. Alternatively, you can execute the failed postmap(1) or postalias(1)
    command by hand, and Postfix will not log the same error again.

A similar request may be logged when a file needs to be indexed as a non-root
user.

UUnneexxppeecctteedd ffiillee oorr ddiirreeccttoorryy oowwnneerr oorr ppeerrmmiissssiioonnss

Other errors may be logged when a database file or directory has an unexpected
owner, or when it is writable by group or by other users.

Example with line breaks added for readability:

    could not execute command 'postmap lmdb:/path/to/file': legacy
    indexed file '/path/to/file.db' is owned by uid '0', but parent
    directory '/path/to' is owned or writable by other user;

    to allow automatic indexing, correct the ownership or permissions;

    alternatively, execute the failed command by hand

Again, you have two options:

 1. Fix the ownership or permission error.

 2. Execute the failed postmap(1) or postalias(1) command by hand, and Postfix
    will not log the same error again.

AAppppeennddiixx:: MMaaiillmmaann iinntteeggrraattiioonn

This section has instructions to migrate an existing Mailman configuration that
wants to use commands like "postmap hash:/path/to/file". Mailman uses such
commands to maintain tables with mailing list contact addresses and domain
names. This will break on systems that no longer have Berkeley DB support.

Solutions:

  * (Not recommended) Upgrade to a Mailman version that contains gitlab commit
    8fa56b72 (May 2025). Unfortunately, this has not yet been widely adopted by
    OS distributions.

  * Avoid Mailman changes, and use Postfix migration support described below.
    In a nutshell, the postmap command will execute the command "postmap hash:/
    path/to/file" as if the command specifies lmdb:/path/to/file (or cdb:,
    depending on Postfix configuration).

With Mailman3 the integration with Postfix using LMTP may look like:

    /var/lib/mailman3/data/postfix_domains      (domain names)
    /var/lib/mailman3/data/postfix_domains.db   (Berkeley DB hash file)
    /var/lib/mailman3/data/postfix_lmtp         (transport map)
    /var/lib/mailman3/data/postfix_lmtp.db      (Berkeley DB hash file)

    Caution: the data directory may contain other files with names ending in
    ".db" that are not part of the Mailman-Postfix integration. Do not tamper
    with the other files.

The relevant Postfix migration levels are:

enable-redirect (redirect hash: to lmdb: or cdb:)
    Command: # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeddiirreecctt

    This will fix the problem that Mailman wants to use commands like "postmap
    hash:/path/to/postfix_domains" and "postmap hash:/path/to/postfix_lmtp".

    Instead of complaining about an unsupported database type, these postmap
    commands will implicitly create ".lmdb" indexed files like (lmdb:/path/to/
    postfix_domains or lmdb:/path/to/postfix_lmtp, or their cdb: versions
    depending on the Postfix default_database_type setting).

    This will not fix the problem that Postfix wants to use databases like
    hash:/path/to/postfix_domains and hash::/path/to/postfix_lmtp. With enable-
    redirect, these will redirect to ".lmdb" indexed files (good) but those
    files do not yet exist (bad). You will need to create them by hand with
    commands like:

    # ppoossttmmaapp llmmddbb:://ppaatthh//ttoo//ppoossttffiixx__ddoommaaiinnss
    # ppoossttmmaapp llmmddbb:://ppaatthh//ttoo//ppoossttffiixx__llmmttpp

    After this, no further human action will be needed. When Mailman needs to
    update these files, it will invoke postmap commands that will work as
    promised above. Leave the Postfix migration level at enable-reindex until
    you can upgrade to a newer Mailman version that supports Postfix with non-
    Berkeley databases.

enable-reindex (also automatically run postmap commands)
    Command: # ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeddiirreecctt

    In addition to "enable-redirect", Postfix will also try to run commands
    like "postmap lmdb:/path/to/postfix_domains" and "postmap lmdb:/path/to/
    postfix_lmtp". There will be some delay depending on the amount of mailing
    list traffic; you may want to post a test message to make the postmap
    commands happen sooner.

    Postfix will log the postmap commands (or will log a request to make some
    configuration changes; see "Addressing errors with automatic indexed file
    generation" above).

    Note: once these "postmap" commands have completed, you should reduce the
    migration support level with the command "ppoossttffiixx nnoonn--bbddbb eennaabbllee--rreeddiirreecctt".
    For security reasons the enable-reindex level should not be permanently
    enabled.

