]> Universität Bremen TZI

Postfach 330440 Bremen D-28359 Germany +49-421-218-63921 cabo@tzi.org

Applications DISPATCH Working Group Internet-Draft BCP18 (RFC 2277) has been the basis for the handling of character-shaped data in IETF specifications for more than a quarter of a century now. It singles out UTF-8 (STD63, RFC 3629) as the "charset" that MUST be supported, and pulls in the Unicode standard with that. Based on this, RFC 5198 both defines common conventions for the use of Unicode in network protocols and caters for the specific requirements of the legacy protocol Telnet. In applications that do not need Telnet compatibility, some of the decisions of RFC 5198 can be cumbersome. The present specification defines "Modern Network Unicode" (MNU), which is a form of RFC 5198 Network Unicode that can be used in specifications that require the exchange of plain text over networks and where just mandating UTF-8 may not be sufficient, but there is also no desire to import all of the baggage of RFC 5198. As characters are used in different environments, MNU is defined in a one-dimensional (1D) variant that is useful for identifiers and labels, but does not use a structure of text lines. A 2D variant is defined for text that is a sequence of text lines, such as plain text documents or markdown format. Additional variances of these two base formats can be used to tailor MNU to specific areas of application.

Introduction (Insert embellished copy of abstract here, .) Complex specifications that use Unicode often come with detailed information on their Unicode usage; this level of detail generally is necessary to support some legacy applications. New, simple protocol specifications generally do not have such a legacy or need such details, but can instead simply use common practice, informed by decades of using Unicode. The present specification attempts to serve as a convenient reference for such protocol specifications, reducing their need for discussing Unicode to just pointing to the present specification and making a few simple choices. There is no intention that henceforth all new protocols "must" use the present specification. It is offered as a standards-track specification simply so it can be normatively referenced from other standards-track specifications.

Conventions Characters in this specification are named with their Unicode scalar value notated in the usual form U+NNNN (where NNNN is a four-to-six-digit upper case hexadecimal number giving the Unicode scalar value), or with their ASCII names (such as CR, LF, HT, RS, NUL) . General unsigned integer values written in hexadecimal are notated in the form 0xNNNN (where NNNN is one or more hexadecimal digits). The following definitions apply:

Byte:

8-bit unit of information interchange, synonym for octet.

Character:

Unicode scalar value, unless otherwise specified. (With , this usage is generally appropriate for IETF specifications; has more about the more complex models that Unicode uses for character-like entities.)

Please see for some more detailed term definitions that may be helpful to relate this specification with the Unicode Standard; please do read its first paragraph if the definitions in this section seem inadequate. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in () () when, and only when, they appear in all capitals, as shown here.

1D Modern Network Unicode One-dimensional Modern Network Unicode (1D MNU) is the form of Modern Network Unicode that can be used for one-dimensional text, i.e., text without a structure of separate text lines. It requires conformance to UTF-8 , as well as to the following four mandates:

1. Control codes (here specifically U+0000 to U+001F and U+007F to U+009F) MUST NOT be used. (Note that this also excludes line endings, so a 1D MNU text string cannot extend beyond a single line. See below if line structure is needed.)
2. The characters U+2028 and U+2029 MUST NOT be used. (In case future Unicode versions add to the Unicode character categories Zl or Zp, any characters in these categories MUST NOT be used.)
3. Modern Network Unicode strongly RECOMMENDS that, except in unusual circumstances (see ), all text is transmitted in normalization form NFC. This mandate is not intended to be realized by routinely normalizing all text, but by encouraging text sources to use NFC if applicable.
4. The code points U+FFFE and U+FFFF MUST NOT be used. Also, Byte Order Marks (leading U+FEFF characters) MUST NOT be used.

Note that several control codes have been in use historically in ASCII documents even within a single text line. For instance BS (U+0008) and CR (U+000D) have been used as a crude way to combine (by overtyping) characters; the present specification does not support this behavior anymore. HT (U+0009, "TAB") has been used for a form of compressing stretches of blank space; by keeping its actual definition open it has also been used to enable users of text to specify variable interpretations of blank space ("indentation"). The present specification RECOMMENDS not using a variance for 1D MNU that would enable the use of BS, HT, or CR; legacy usage of HT may be more appropriate in certain forms of 2D text.

2D Modern Network Unicode Two-dimensional Modern Network Unicode (2D MNU) enhances 1D MNU by structuring the text into lines. 2D MNU does this by using the control code LF (U+000A) for a line terminator. The use of an unterminated last line is permitted, but not encouraged. (This is not a variance.) Historically, the Internet NVT (See Section "THE NETWORK VIRTUAL TERMINAL" in RFC 0854 as part of the Telnet specification ) and thus, much later, Network Unicode have used the combination CR+LF as a line terminator, reflecting its heritage based on teletype functionality. The use of U+000D mostly introduces additional ways to create interoperability problems. goes to great lengths to reduce the harm the presence of CR characters does to interchange of XML documents. Pages 10 and 11 of discuss how CR can actually only be used in the combinations CR+NUL and CR+LF. 2D MNU simply elides the CR. In other words, 2D MNU adds the use of line endings, represented by a single LF character (which is then the only control character allowed). Variances are available for (1) allowing or even (2) requiring the use of CR before LF.

3D? Three-dimensional forms of text have been used, e.g., by using U+000C FF ("form feed") to add a page structure to the long-time ASCII-based RFC format , or by using U+001E RS ("record separator") to separate several (2D) JSON texts in a JSON sequence . As the need for this form of structure is now mostly being addressed by building data structures around text items, the present specification does not define a common 3D MNU. If needed, variances such as the use of FF or RS can be described in the documents specifying the 3D format.

Variances In addition to the basic 1D and 2D versions of MNU, this specification describes a number of variances that can be used in the forms such as "2D Modern Network Unicode with VVV", or "2D Modern Network Unicode with VVV, WWW, and YYY" for multiple variances used. Specifications that cannot directly use the basic MNU forms may be able to use MNU with one or more of these variances added. An example for the usage of variances: Up to RFC 8649, RFCs were formatted in "2D Modern Network Unicode with CR-tolerant lines and FF characters", or exceptionally , "2D Modern Network Unicode with CR-tolerant lines, FF characters, and BOM".

With CR-tolerant lines The variance "with CR-tolerant lines" allows the sequence CR LF as well as a single LF character as a line ending, ignoring the CR (i.e., the presence or absence of a CR in front of an LF MUST be equivalent). This may enable existing texts to be used as MNU without processing at the sender side (substituting that by processing at the receiver side). Note that, with this variance, a CR character cannot be used anywhere else but immediately preceding an LF character.

With CR-LF The variance "with CR-LF lines" requires the sequence CR LF as a line ending; a single LF character is not allowed. This is appropriate for certain existing environments that have already made that determination.

With Line or Paragraph Separators For 2D applications, and even for 1D applications that need to address text in 2D forms, it may be useful to enable the use of U+2028 and U+2029; this should be explicitly called out.

With HT Characters In some cases, the use of HT characters ("TABs") cannot be completely excluded. The variance "with HT characters" allows their use, without attempting to define their meaning (e.g., equivalence with spaces, column definitions, etc.).

With /CCC/ Characters Some applications of MNU may need to add specific control characters, such as RS or FF characters . This variance is spelled with the ASCII name of the control character for CCC, e.g., "with RS characters".

With NFC This variance turns the encouragement of using NFC normalization form into a requirement. Please see for why this should be an exceptional case.

With NFKC Some applications require a stronger form of normalization than NFC. The variance "with NFKC" swaps out NFC and uses NFKC instead. This is probably best used in conjunction with "with Unicode version NNN".

With Unicode Version NNN Some applications need to be sure that a certain Unicode version is used. The variance "with Unicode version NNN" (where NNN is a Unicode version number) defines the Unicode version in use as NNN. Also, it requires that only characters assigned in that Unicode version are being used. See for more discussion of Unicode versions.

With BOM In some environments, UTF-8 files need to be distinguished from files in other formats without the benefit of out of band information such as media types. One convention that has been used in certain environments was to prepend a "Byte Order Mark" (U+FEFF) as a distinguishing mark (as UTF-8 is not influenced by different byte orders, this mark does not serve a purpose in UTF-8). Sometimes these BOMs are included for interchange to ensure local copies of the file include the distinguishing mark. This variance enables this usage.

Using ABNF with Unicode Internet STD 68, , defines Augmented BNF for Syntax Specifications: ABNF. Since the late 1970s, ABNF has often been used to formally describe the pieces of text that are meant to be used in an Internet protocol. ABNF was developed at a time when character coding grew more and more complicated, and even in its current form, discusses encoding of characters only briefly (Section of RFC 5234 ). This discussion offers no information about how this should be used today (it actually still refers to 16-bit Unicode!). The best current practice of using ABNF for Unicode-based protocols is as follows: ABNF is used as a grammar for describing sequences of Unicode code points, valued from 0x0 to 0x10FFFF. The actual encoding (as UTF-8) is never seen on the ABNF level; see for a recent example of this. Approaches such as representing the rules of UTF-8 encoding in ABNF (see for an example) add complexity without benefit and are NOT RECOMMENDED. ABNF features such as case-insensitivity in literal text strings essentially do not work for general Unicode; text string literals therefore (and by the definition in Section of RFC 5234 ) are limited to ASCII characters. That is often not actually a problem in text-based protocol definitions. Still, characters beyond ASCII need to be allowed in many productions. ABNF does not have access to Unicode character categories and thus will be limited in its expressiveness here. The core rules defines in Appendix of RFC 5234 are limited to ASCII as well; new rules will therefore need to be defined in any protocol employing modern Unicode. The present specification recommends defining ABNF rules as in these examples:

IANA considerations This specification places no requirements on IANA.

Security considerations The security considerations of apply. A variance "with NUL characters" would create specific security considerations as discussed in the security considerations of and should therefore only be used in circumstances that absolutely do require it.

References Normative References This document is the current policies being applied by the Internet Engineering Steering Group (IESG) towards the standardization efforts in the Internet Engineering Task Force (IETF) in order to help Internet protocols fulfill these requirements. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. ISO/IEC 10646-1 defines a large character set called the Universal Character Set (UCS) which encompasses most of the world's writing systems. The originally proposed encodings of the UCS, however, were not compatible with many current applications and protocols, and this has led to the development of UTF-8, the object of this memo. UTF-8 has the characteristic of preserving the full US-ASCII range, providing compatibility with file systems, parsers and other software that rely on US-ASCII values but are transparent to other values. This memo obsoletes and replaces RFC 2279. Internet technical specifications often need to define a formal syntax. Over the years, a modified version of Backus-Naur Form (BNF), called Augmented BNF (ABNF), has been popular among many Internet specifications. The current specification documents ABNF. It balances compactness and simplicity with reasonable representational power. The differences between standard BNF and ABNF involve naming rules, repetition, alternatives, order-independence, and value ranges. This specification also supplies additional rule definitions and encoding for a core lexical analyzer of the type common to several Internet specifications. [STANDARDS-TRACK] In many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. RFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings. Informative References This document describes updated methods for handling Unicode strings representing usernames and passwords. The previous approach was known as SASLprep (RFC 4013) and was based on Stringprep (RFC 3454). The methods specified in this document provide a more sustainable approach to the handling of internationalized usernames and passwords. This document obsoletes RFC 7613. This Request for Comments (RFC) provides information about the preparation of RFCs, and certain policies relating to the publication of RFCs. This memo provides information for the Internet community. This memo does not specify an Internet standard of any kind. This document describes the JavaScript Object Notation (JSON) text sequence format and associated media type "application/json-seq". A JSON text sequence consists of any number of JSON texts, all encoded in UTF-8, each prefixed by an ASCII Record Separator (0x1E), and each ending with an ASCII Line Feed character (0x0A). There are a number of circumstances in which an escape mechanism is needed in conjunction with a protocol to encode characters that cannot be represented or transmitted directly. With ASCII coding, the traditional escape has been either the decimal or hexadecimal numeric value of the character, written in a variety of different ways. The move to Unicode, where characters occupy two or more octets and may be coded in several different forms, has further complicated the question of escapes. This document discusses some options now in use and discusses considerations for selecting one for use in new IETF protocols, and protocols that are now being internationalized. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements. This is the specification of the Telnet protocol used for remote terminal access in the ARPA Internet. The purpose of the TELNET Protocol is to provide a fairly general, bi-directional, eight-bit byte oriented communications facility. Its primary goal is to allow a standard method of interfacing terminal devices and terminal-oriented processes to each other. It is envisioned that the protocol may also be used for terminal-terminal communication ("linking") and process-process communication (distributed computation). This RFC specifies a standard for the ARPA Internet community. Hosts on the ARPA Internet are expected to adopt and implement this standard. Obsoletes NIC 18639. This memo specifies the general form for Telnet options and the directions for their specification. This RFC specifies a standard for the ARPA Internet community. Hosts on the ARPA Internet are expected to adopt and implement this standard. Obsoletes RFC 651, NIC 18640. The Internet today is in need of a standardized form for the transmission of internationalized "text" information, paralleling the specifications for the use of ASCII that date from the early days of the ARPANET. This document specifies that format, using UTF-8 with normalization and specific line-ending sequences. [STANDARDS-TRACK] The Unicode Consortium For convenience, this bibliography entry points to what was the most recent version of Unicode at the time of writing. It is, however, intended to be a generic reference to the most recent version of Unicode, which always can be found at http://www.unicode.org/versions/latest/. The Unicode Consortium n.d. YANG is a data modeling language used to model configuration and state data manipulated by the Network Configuration Protocol (NETCONF), NETCONF remote procedure calls, and NETCONF notifications. [STANDARDS-TRACK] Internet Message Access Protocol (IMAP) version 4rev1 has basic support for non-ASCII characters in mailbox names and search substrings. It also supports non-ASCII message headers and content encoded as specified by Multipurpose Internet Mail Extensions (MIME). This specification defines a collection of IMAP extensions that improve international support including language negotiation for international error text, translations for namespace prefixes, and comparator negotiation for search, sort, and thread. [STANDARDS-TRACK]

Terminology In order for the main body of this specification to stay readable for its target audience, we banish what could be considered excessive detail into appendices. Expert readers who know a lot more about Coded Character Sets and Unicode than the target audience of the present document is likely interested in, are requested to hold back the urge to request re-introduction of excessive detail into the main body. For instance, this specification has a local definition of "Unicode character" that is useful for protocol designers, but is not actually defined by the Unicode consortium; the details are here. Some definitions below reference definitions given in the Unicode standard and are simplified from those, which see if the full detail is needed.

Grapheme:

The smallest functional unit of a writing system. For computer representation, graphemes are represented by characters, sometimes a single character, sometimes decomposed into multiple characters. In visible presentation, graphemes are made visible as glyphs; for computer use, glyphs are collected into typefaces (fonts). The term grapheme is used to abstract from the specific glyph used — a specific glyph from a typeface may be considered one of several allographs for a grapheme.

Character:

Only defined as "abstract character" in : A unit of information used for the organization, control, or representation of textual data (definition D7). Most characters are used to stand for graphemes or to build graphemes out of several characters. Characters are usually used in ordered sequences, which are referred to as "character strings".

Character set, Coded Character Set:

A mapping from code points to characters. Note that the shorter form term "character set" is easily misunderstood for a set of characters constituting a palette to choose from; the latter are called "character repertoire".

Character repertoire:

A set of characters, in the sense of what is available as characters to choose from.

Code point:

The (usually numeric) value used in a coded character set to refer to a character. Note that code points may undergo some encoding before interchange, see Unicode transformation format below. Code points can also be allocated to refer to internal constructs of a Unicode transformation format instead of referring to characters. Unicode uses unsigned numbers between 0 and 1114111 (0x10FFFF) as code points.

Unicode transformation format (UTF):

Character (and character strings) usually are interchanged as a sequence of bytes. A Unicode Transformation Format or Unicode Encoding Scheme specifies a byte serialization for a Unicode encoding form. (See definition D94 in Section 3.10, Unicode Encoding Schemes.)

Code unit:

A bit combination used for encoding text for processing or interchange. The Unicode Standard uses 8-bit code units in the UTF-8 encoding form, 16-bit code units in the UTF-16 encoding form, and 32-bit code units in the UTF-32 encoding form. (See Definition D77 in Section 3.9, Unicode Encoding Forms.)

Unicode scalar value:

Unicode code points except high-surrogate and low-surrogate code points (see ). In other words, the ranges of integers 0 to 0xD7FF and 0xE000 to 0x10FFFF inclusive. (See Definition D76 in Section 3.9, Unicode Encoding Forms.)

Unicode character:

For the purposes of the present specification, we use "Unicode character" as a synonym for "Unicode scalar value". Only when enough context is present, the term may be abbreviated as "character", the above more general definition notwithstanding. Note that this term includes Unicode scalar values that are not Assigned Characters; for the purposes of a specification using the present document, it is rarely useful to make this distinction, as Unicode evolves and could assign characters not assigned. Note also that the definition of this term includes what Unicode terms "noncharacters", which may be surprising if this term is taken at face value: Unicode uses it for one out of a stable set of 66 Unicode scalar values that have been set aside with the promise they will never be assigned. For a readable introduction into the historical context of this concept and the term, please see .

History, Legacy Some of the complexity of using Unicode is, unsurprisingly, rooted in its long history of development. Unicode originally was introduced around 1988 as a 16-bit character standard. By the early 1990s, a specification had been published, and a number of environments eagerly picked up Unicode. Unicode characters were represented as 16-bit values (UCS-2), enabling a simple character model using these uniformly 16-bit values as the characters. Programming language environments such as those of Java, JavaScript and C# (.NET) are now intimately entangled with this character model. In the mid-1990s, it became clear that 16 bits would not suffice. Unicode underwent an extension to 31 bits, and then back to ~ 21 bits (0 to 0x10FFFF). For the 16-bit environments, this was realized by switching to UTF-16, a "Unicode transformation format" (UTF-16). This reassigned some of the 16-bit code points not for characters, but for 2 sets of 1024 "surrogates" that would be used in pairs to represent characters that do not fit into 16 bits. Each of these surrogates supplies 10 bits; together they add 2²⁰ code points to the 2¹⁶ already available (this leads to the surprising upper limit of 0x10FFFF). In parallel, UTF-8 was created as an ASCII-compatible form of Unicode representation that would become the dominant form of text in the Web and other interchange environments. The UCS-2 based character models of the legacy 16-bit platforms in many cases couldn't be updated for fully embracing UTF-16 right away. For instance, only much later did ECMAScript introduce the "u" (Unicode) flag for regular expressions to have them actually match "Unicode" characters. So, on these platforms, UTF-16 is handled in a UCS-2 character model, and sometimes orphaned surrogates leak out instead of Unicode characters as "code points" in interfaces that are not meant to impose these implementation limitations on the outside world. UTF-8 is unaffected by this UTF-16 quirk and of course doesn't support encoding surrogates. (UTF-8 is careful to allow a single representation only for each Unicode character, and enabling the alternative use of surrogate pairs would violate that invariant, while isolated surrogates don't mean anything in Unicode.) Newly designed IETF protocols typically do not have to consider these problems, but occasionally there are attempts to include isolated surrogate code points into what we call Unicode characters here.

Normalization Please see for a brief introduction to Unicode normalization and Normalization Form C (NFC). However, since that section was written, additional experience with normalization has led to the realization that the Unicode normalization rules do not always preserve certain details in certain writing systems. Therefore, the implementation approach of routinely normalizing all text before interchange has fallen out of favor. Instead, implementations are encouraged to use text sources that already generally use NFC except where normalization would have been harmful. Where two text strings needs to be compared, it may be appropriate to apply normalization to both text strings for the purposes of the comparison only. Additional complications can come from the fact that some implementations of applications may rely on operating system libraries over which they have little control. The need to maintain interoperability in such environments suggests that receivers of MNU should be prepared to receive unnormalized text and should not react to that in excessive ways; however, there also is no expectation for receivers to go out of their way doing so.

Relationship to RFC 5198 Of the mandates listed in , the third and fourth requirement are also posed by , while the first two remove further legacy compatibility considerations. contains some discussion and background material that the present document does not attempt to repeat; the interested reader may therefore want to consult it as an informative reference. Mandates of that are specific to a version of Unicode are not picked up in this specification, e.g., there is no check for unassigned code points. Some implementations may want to add such a check; however, in general, this can hinder further evolution as it may become hard to use new characters as long as not every component on the way has been upgraded. (See also .)

Going beyond RFC 5198 The handling of line endings (with 2D MNU prescribing LF as the line terminator, and adding or specifying CRLF line endings as variances) may be controversial. In particular, calling out CR-tolerance as an extra (and often undesirable) feature may seem novel to some readers. The handling as specified here is much closer to the way line endings are handled on the software side than the cumbersome rules of . More generally speaking, one could say that the present specification is intended to be used by state-of-the-art protocols going forward, maybe less so by existing protocols. Even in the "with CR-tolerant lines" variance, the CR character is only allowed as an embellishment of an immediately following LF character. This reflects the fact that overprinting has only seen niche usage for quite a number of decades now (and otherwise has been supplanted by the concept of "combining characters"). Unicode Line and Paragraph separators probably seemed like a good idea at the time, but have not taken hold. Today, their occurrence is more likely to trigger a bug or even serve as an attack. HT characters ("TABs") were needed on ASR33 terminals to speed up processing of blank spaces at 110 bit/s line speed. Unless some legacy applications require compatibility with this ancient and frequently varied convention, HT characters are no longer appropriate in Modern Network Unicode. In support of legacy compatibility cases that do require tolerating their use, the "with HT characters" variance is defined. The version-nonspecific nature of MNU creates some fuzziness that may be undesirable but is more realistic in environments where applications choose the Unicode version with the Unicode library that happens to be available to them.

Byte order marks For UTF-8, there is no encoding ambiguity and thus no need for a byte order mark. However, some systems have made regular use of a leading U+FEFF character in UTF-8 files, anyway, often in order to mark the file as UTF-8 in case other character codings are also in use and metadata is not available. This destroys the ASCII compatibility of UTF-8; it also creates problems when systems then start to expect a BOM in UTF-8 input and none is provided. Section of RFC 3629 also RECOMMENDS not using Byte Order Marks with UTF-8 when it is clear that this charset is being used, but does not phrase this as an unambiguous mandate, so we add that here (as did ), unless permitted by a variance. Some background on the construct of byte order marks: The 16-bit and 32-bit encodings for Unicode are available in multiple byte orders. The byte order in use in a specific piece of text can be provided by metadata (such as a media type) or by prefixing the text with a "Byte Order Mark", U+FEFF. Since code point U+FFFE is never used in Unicode, this unambiguously identifies the byte order. There is no need to indicate a byte order in UTF-8; this discussion only relates to the secondary use of the character used in byte order marks as a UTF-8 signature in otherwise unspecified text files.

Acknowledgements Klaus Hartke and Henk Birkholz drove the author out of his mind enough to make him finally write this up. James Manger, Tim Bray and Martin Thomson provided comments on an early version of this draft. Doug Ewell proposed to define an ABNF rule NONASCII, of which we have included the essence.