pesto(1)

NAME
pesto - Configure a running passt(1) or pasta(1) instance.

SYNOPSIS
pesto [OPTION]... PATH

DESCRIPTION
pesto is a client to view and update the port forwarding configuration of a running passt(1) or pasta(1) instance. PATH gives the path to the UNIX domain socket created by passt or pasta. It should match the -c command line option given to that instance.

OPTIONS

-d, --debug
    Be verbose.

-h, --help
    Display a help message and exit.

-s, --show
    Show the forwarding configuration before and after changes are applied.

-A, --add
    Add the port forwarding specifiers following this option to the current forwarding table, rather than replacing it. This option can be given multiple times, as it might follow previous deletions (see --delete below), and implies that all the specifiers following it, before a further --delete option occurs, will be handled as additions. See the section Adding, deleting, clearing rules in the NOTES for more details.

-D, --delete
    Delete the port forwarding specifiers following this option from the current forwarding table, rather than adding them to it. This option can be given multiple times, as it might follow previous additions (see --add above), and implies that all the specifiers following it, before a further --add option occurs, will be handled as deletions. See the section Adding, deleting, clearing rules in the NOTES for more details.

-C, --clear pif
    Clear the forwarding table associated to a given pif, that is, a conceptual type of interface in passt(1) or pasta(1) representing a specific data path and direction. The available pif names can be obtained by querying the current forwarding configuration, which can be done by calling pesto(1) without options. See the section Adding, deleting, clearing rules in the NOTES for more details.

-t, --tcp-ports spec
    Configure TCP port forwarding to guest or namespace. spec can be one of:

    none
        Don't forward any ports

    [address[%interface]/]ports ...
        Specific ports to forward. Optionally, a specific listening address and interface name (since Linux 5.7) can be specified. ports may be either:

        all Forward all unbound, non-ephemeral ports, as permitted by current capabilities. No failures are reported for unavailable ports, unless no ports could be forwarded at all.
        or a comma-separated list of entries which may be any of:

        first[-last][:tofirst[-tolast]]
            Include range. Forward port numbers between first and last (inclusive) to ports between tofirst and tolast. If tofirst and tolast are omitted, assume the same as first and last. If last is omitted, assume the same as first.

        ~first[-last]
            Exclude range. Don't forward port numbers between first and last. This takes precedences over include ranges.

        auto
            pasta only. Only forward ports in the specified set if the target ports are bound in the namespace. The list of ports is periodically derived (every second) from listening sockets reported by /proc/net/tcp and /proc/net/tcp6, see proc(5).
    Specifying excluded ranges only implies that all other non-ephemeral ports are forwarded. Specifying no ranges at all implies forwarding all non-ephemeral ports permitted by current capabilities. In this case, no failures are reported for unavailable ports, unless no ports could be forwarded at all. Examples:

        -t all
            Forward all unbound, non-ephemeral ports as permitted by current capabilities to the corresponding port on the guest or namespace

        -t ::1/all
            For the local address ::1, forward all unbound, non-ephemeral ports as permitted by current capabilities

        -t 22
            Forward local port 22 to port 22 on the guest or namespace

        -t 22:23
            Forward local port 22 to port 23 on the guest or namespace

        -t 22,25
            Forward local ports 22 and 25 to ports 22 and 25 on the guest or namespace

        -t 22-80
            Forward local ports between 22 and 80 to corresponding ports on the guest or namespace

        -t 22-80:32-90
            Forward local ports between 22 and 80 to ports between 32 and 90 on the guest or namespace

        -t 192.0.2.1/22
            Forward local port 22, bound to 192.0.2.1, to port 22 on the guest or namespace

        -t 192.0.2.1%eth0/22
            Forward local port 22, bound to 192.0.2.1 and interface eth0, to port 22

        -t %eth0/22
            Forward local port 22, bound to any address on interface eth0, to port 22

        -t 2000-5000,~3000-3010
            Forward local ports between 2000 and 5000, except for those between 3000 and 3010

        -t 192.0.2.1/20-30,~25
            For the local address 192.0.2.1, forward ports between 20 and 24 and between 26 and 30

        -t ~20000-20010
            Forward all ports to the guest, except for the range from 20000 to 20010

        -t auto
            Automatically forward any ports which are bound in the namespace

        -t ::1/auto
            Automatically forward any ports which are bound in the namespace, listening only on local port ::1

        -t 8000-8010,auto
            Forward ports in the range 8000-8010 if and only if they are bound in the namespace

-u, --udp-ports spec
    Configure UDP port forwarding to guest. spec is as described for TCP above.

-T, --tcp-ns spec
    Configure TCP port forwarding from target namespace to init namespace. spec is as described above.

-U, --udp-ns spec
    Configure UDP port forwarding from target namespace to init namespace. spec is as described above.

--version
    Show version and exit.

NOTES

  Adding, deleting, clearing rules
The options --add, --delete, and --clear are handled as sequential commands to manipulate the current forwarding tables. If none of them is given, forwarding specifiers for a given table are intended as replacement of the corresponding table. That is:
	pesto -t 1024 -U 1025
will replace the current TCP inbound port forwarding table with a single rule, forwarding port 1024, and will similarly replace the UDP outbound forwarding table with a single forwarding rule for port 1025. This usage is a short-hand form for:
	pesto -C HOST -t 1024 -C SPLICE -U 1025
The options --add and --delete are used to add new specific rules or delete existing ones, instead of replacing tables. For example:
	pesto -A -t 2000 -D -t 3000 -U 5000
will add a forwarding rule for inbound TCP port 2000, and delete inbound TCP port 3000 as well as outbound UDP port 5000 from the existing set of rules. All these options are interpreted as sequential commands and can be arbitrarily combined. For example:
	pesto -A -t 2000 -C HOST -A -T 3000 -t 2001 -D -u 5000
will, in order:
    - add inbound TCP port 2000 - clear inbound ports, reverting the addition above - add outbound TCP port 3000 - add inbound TCP port 2001 - delete inbound UDP port 5000

AUTHORS
Stefano Brivio <sbrivio@redhat.com>, David Gibson <david@gibson.dropbear.id.au>.

REPORTING BUGS
Please report issues on the bug tracker at https://bugs.passt.top/, or send a message to the passt-user@passt.top mailing list, see https://lists.passt.top/.

COPYRIGHT
Copyright Red Hat pesto is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version.

SEE ALSO
passt(1), pasta(1), unix(7).